Edge 545 Posted November 21 Share Posted November 21 Friend has built a dredge needs a 4" nozzle. Anybody? Quote Link to post Share on other sites
Ridge Runner 86 Posted November 21 Share Posted November 21 You can make one out of 4 inch PVC pipe and then a straight rubber boot to go between the two . That’s between the PVC and 4 inch hose . Chuck 1 Quote Link to post Share on other sites
Ridge Runner 86 Posted Tuesday at 04:32 PM Share Posted Tuesday at 04:32 PM This is PVC going from a 4 to a 3”because most places you dredge will require it to be neck down to a 3” . This is fixed for a jet are suction nozzle. The dredge I make is nothing you’ve seen before but works great for me . Cheap to make but don’t get hollow core because solid core will last longer. If you’re getting it in 4foot they will have a sign above it saying what is what. Chuck 2 Quote Link to post Share on other sites
Ridge Runner 86 Posted Tuesday at 05:10 PM Share Posted Tuesday at 05:10 PM Here is one where I cut the 4” at a 45 and just rotate your cut and glue it back together. I reduce it to a 3” on the intake plus put bolts across to keep large rocks out . It’s not going to win a beauty contest but as long it works for you. Chuck 3 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.