Jump to content
Nugget Shooter Forums

DIY PROJECTS

Got a cool project, want to share a project plan? Here is the place to share what you have built.


Forum Guidelines

There are just a few rules here and yup I do enforce them and keep an eye on things as best I can. Here are a few guidelines I'd like you to follow if you will be participating here. This forum is not moderated as heavily as the other sections so please do not enter or open a topic if you think you will be offended. If you are at least respond like an adult or we will remove your post as soon as brought to our attention.

Vulgar and abusive language is not welcome here! Heck a cuss word to get a point across is not so bad, but I think you know what I mean.

I will not host public arguments and pissing matches between individuals here so please just don't do it. When it happens the post most times will simply vanish into cyber space.

Political or Religious posts belong in "Off Topic" but surly you can find other forums that host those discussions if it is your thing, I don't think anyone cares if you are Conservative or Liberal when we are out hunting gold nuggets.

You may not use this forum to advertise any other dealer, store, or product without written permission by owner at any time. Used items are allowed in the classified section.

This forum is not responsible for anything said by it's members at any time. This is a public forum and will remain so and although I can and will occasionally zap "bad content" I don't do it often and so far have never permanently banned a person. Also opinions expressed here do not always represent the opinion of the forum's owner!

Guests are welcome to browse the forum and use the information provided by registered members, but you can not post yourself until you are a registered member.

That is pretty much it my fellow Nugget Shooters so enjoy the forum, keep it clean and play nice.

157 topics in this forum

    • 13 replies
    • 158 views
    • 18 replies
    • 375 views
    • 3 replies
    • 207 views
    • 9 replies
    • 433 views
    • 12 replies
    • 501 views
  1. Working on the YOTO

    • 22 replies
    • 346 views
    • 3 replies
    • 198 views
  2. Near UV Flash Light

    • 64 replies
    • 1,814 views
    • 10 replies
    • 427 views
    • 11 replies
    • 523 views
  3. Twisting Up DIY Coils ?

    • 60 replies
    • 5,517 views
    • 24 replies
    • 4,519 views
  4. My DIY Miller Table

    • 7 replies
    • 612 views
  5. My DIY Gas Vac

    • 18 replies
    • 622 views
    • 10 replies
    • 852 views
    • 16 replies
    • 7,443 views
    • 22 replies
    • 1,256 views
  6. My $45 Gold Vac

    • 23 replies
    • 3,680 views
  7. SCOOPION!

    • 7 replies
    • 1,070 views
    • 5 replies
    • 1,309 views
    • 13 replies
    • 7,926 views
    • 14 replies
    • 3,365 views
    • 9 replies
    • 1,505 views
    • 8 replies
    • 1,437 views
  8. DIY Finishing table

    • 30 replies
    • 4,041 views
  • Posts

    • Popac I find hot rocks left in the bottom of pre-dug holes all the time. specific gravity of graphite is around 2.25  its pencil lead. AzNuggetBob
    • I would think it's a bear trying to keep every symmetrically EXACTLY the same. Even a half a thousandths can do strange things in a Combustion chamber. Dang Dave ! Yea was spitting out words way above my pay grade. I had to look em up !     """ Posted by T.O.O. on June 21, 1998 at 12:05:53: In Reply to: What is "quench"? What is a "quench area" Why is it good? n/m posted by body on June 21, 1998 at 10:09:42: Quench, or squish area is typically the flat area on the top of the piston that's almost level with the top of the block deck. It must have a corresponding flat area on the deck surface of the head to qualify as quench. If you look at a combustion chamber, you will usually see these flat areas, and they will have the volume of the actual combustion chamber between them. When the piston is compressing the mixture, as the piston nears the head, the flat areas on the head and piston come together and force the mixture from those areas to "squish" into the chamber, where the spark plug and burning mixture reside, so you achieve a more complete burn. The quench area also runs cooler than the rest of the chamber / piston. These lower temperatures are where the "quench" comes from. When properly designed, the quench areas can have a tremendous effect on the quality of combustion, and allow higher compression ratios, and due to this they are considered "artificial octane" by scientific types. Bottom line is "properly designed, quench is good". .......................................T.O.O. ....................................... ps. As it is like (more octane), and promotes a better burn, why do the turbo people do away with it?? Go figure. """
    • Hey everyone, i have calculated the density and done streak marks on porculain. Density is between 2.05-2.15. It does not attract magnet hanging on a thread, and does not attract needle hanging on a thread. Streak marks are grey-silverish, similar to the colour of the rock, pencil like. I'm open to any suggestions now you might have about what it is. Thank you for responses
    • It's definitely not a meteorite. Chip off a small piece and use a hammer to reduce it to a powder. Smear a little bit on a piece of white paper with your finger. . Let us know what color it is.
    • It is 99% identical as the rock in this video. Let me know what you think thank you. I don't see a reason why my friend would lie to me, the way it appeared it could have come only from above. Thank you for your responses. https://youtu.be/OI9PWViGAXQ
  • Today's Birthdays

    1. Boondog
      Boondog
      (63 years old)
    2. Magic Mike
      Magic Mike
      (22 years old)
    3. Rockfish
      Rockfish
      (67 years old)
    4. wa.state shooter
      wa.state shooter
      (53 years old)
    5. wonderer
      wonderer
      (66 years old)
×
×
  • Create New...